HOSE AS 3376258 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove power from the junction box.
Illustration 1 g00597175
Remove the four screws (1) in order to pull the cover (not shown).
Disconnect the electrical connections (2).
Remove the four screws (3).
Illustration 2 g00597176
Disconnect the four screws (4) in order to remove the driver modules (5) and the driver module (6).
Illustration 3 g00597177
Remove the four screws (7) that hold the remaining driver module (8). Remove the driver module (8). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00597177
Position the driver module (8) in the bracket. Install the four screws (7).
Illustration 5 g00597176
Position the driver module (5) and the driver module (6). Install the four screws (4).
Illustration 6 g00597175
Position the driver module (8) between the driver module (5) and the driver module (6). Install the four screws (3).
Connect the electrical connections (2).
Position the cover (not shown). Install the four screws (1).
Connect power to the junction box.