HOSE AS 3388568 - Caterpillar

Illustration 2 g03192557
Table 2
Item Qty Part Specification Description
2 1 2S-2760 Spring Length under test force is 117.14 mm (4.612 inch).
Test force is 499 24 N (112 5 lb).
Free length after test is 152.91 mm (6.020 inch).
Illustration 3 g03192558
Section A-A
Table 3
Item Qty Part Specification Description
3 2 7N-5052 Gear Length of new gear is 84.000 0.015 mm (3.3071 0.0006 inch).
Depth in the oil pump body for the new gear is 84.150 0.020 mm (3.3130 0.0008 inch).
4 2 7W-0059 Pump Shaft Assembly Diameter is 31.742 0.008 mm (1.2497 0.0003 inch).
Distance (C) from the end of the idler shaft to the gear face is 34.0 0.5 mm (1.34 0.02 inch).
5 1 2W-6618 Pump Drive Shaft As Diameter is 31.742 0.008 mm (1.2497 0.0003 inch).
Distance (D) from the end of the shaft to the gear face is 47.0 0.5 mm (1.85 0.02 inch).
Illustration 4 g03192559
1N-4637 Pump Cover
Table 4
Item Qty Part Specification Description
6 2 7N-2043 Dowel Protrusion (E) from the pump cover is 6.0 1.0 mm (0.24 0.04 inch).
Illustration 5 g03192560
4P-5637 Oil Pump Body As
Table 5
Item Qty Part Specification Description
7 3 7W-0060 Bushing After assembly, bore in the bushing for the new shaft assembly is 31.811 0.013 mm (1.2524 0.0005 inch).
Installation depth is 1.5 0.5 mm (0.06 0.02 inch).
Position (F) of bushing joints from the centerline through the bearing bores is 45 15 degrees.
Illustration 6 g03192561
7W-0050 Pump Cover
Table 6
Item Qty Part Specification Description
8 3 7W-0060 Bushing After assembly, bore in the bushing for the new shaft assembly is 31.811 0.013 mm (1.2524 0.0005 inch).
Installation depth is 1.5 0.5 mm (0.06 0.02 inch).
Position (G) of bushing joints from the centerline through the bearing bores is 45 15 degrees.
- - - Extension of 4M-3248 Hollow Dowel from the pump cover is 6.0 0.5 mm (0.24 0.02 inch).