HOSE AS 3459830 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    
B     8S-9906     Ratchet Puller     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have the same sealing properties as a new O-ring. A reconditioning procedure should not be degraded because of a low cost component such as an O-ring or a gasket. Use 1U-6396 O-Ring Assembly Compound during the installation procedure.
Illustration 1 g00722699
Install O-ring seal (6) on implement pump (5) .
Illustration 2 g01034338
Use Tooling (B) and Tooling (A) in order to install implement pump (5). The weight of implement pump (5) is approximately 70 kg (160 lb).
Illustration 3 g00722691
Install bolts (4) and the washers in implement pump (5) .
Remove Tooling (B) and Tooling (A) from the machine.
Illustration 4 g00722640
Connect hose assembly (3) to the front of implement pump (5) .
Illustration 5 g00722633
Connect hose (2) to the compensator valve on pump (5) .
Illustration 6 g00722630
Install the O-ring seal in hose (1). Connect hose (1) to the bottom of implement pump (5) .End By: Install the power train oil pump. Refer to the procedure in Disassembly and Assembly, "Power Train Oil Pump - Install".