HOSE AS 3474342 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     180-3034     Repair Stand Set     3    Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove".
Position the hood on Tooling (A). The hood must be at least 559 mm (22.0 inch) from the ground.
Illustration 1 g01097612
Loosen clamp (1) and remove stack (2) .
Illustration 2 g01097613
Attach a suitable lifting device onto muffler (3) .
Illustration 3 g01097616
Disconnect hose (4) .
Illustration 4 g01097650
Remove bolts (5) and remove muffler (3) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     180-3034     Repair Stand Set     3    
Illustration 5 g01097650
Attach a suitable lifting device onto muffler (3). Position muffler (3) and install bolts (5) .
Illustration 6 g01097616
Connect hose (4) .
Illustration 7 g01097612
Install stack (2) and tighten clamp (1) .
Remove the hood from Tooling (A) .End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Install".