HOSE AS 3479202 - Caterpillar

Illustration 1 g01298602
Adjust the control levers so that the rods are vertical. Operate the control levers through all of the operating positions in order to ensure proper working order. If necessary, adjust the control linkage. (1) Apply 4C-4030 Thread Lock Compound to the threads and hand tighten the knob. (2) 293-9677 Rod Assembly Distance from pin to pin ... 113 3 mm (4.44 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (3) Torque for nut ... 25 6 N m (19 4 lb ft) (4) 271-2665 Rod Assembly Distance from pin to pin ... 112 3 mm (4.40 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (5) 271-2663 Rod Assembly Distance from pin to pin ... 155 3 mm (6.10 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (6) Installation depth of the control rod ... 20 3 mm (0.80 0.11 inch) (7) Torque for three nuts ... 60 12 N m (45 9 lb ft) (8) 271-2661 Rod Assembly Distance from pin to pin ... 117 3 mm (4.60 0.10 inch) Torque for locknuts ... 25 6 N m (19 4 lb ft) (9) Pack the bearings and the cavities with 1P-0808 Multipurpose Grease. Drive the bearings on the stamped end only. Lubricate the lips of the seals with the lubricant that is being sealed. This specification is used in four places. (10) Installation depth of the bearings ... 4.5 0.5 mm (0.18 0.02 inch)