HOSE AS 3487716 - Caterpillar

Illustration 3 g00506678
Connect cable assembly (35) to the sequence and pressure control valve.
Connect hose assembly (34) to the sequence and pressure control valve.
Connect hose assembly (33) to the torque converter.
Illustration 4 g00506675
Attach a suitable lifting sling and a hoist to implement hydraulic pump (32). Place the pump in position. The weight of the pump is 98 kg (216 lb). Install the two washers and bolts (31) that hold the pump in place.
Illustration 5 g00506673
Install transmission oil pump (30). Install the two washers and bolts (29) that hold the pump in position.
Connect hose assemblies (26) and (28) to the transmission oil pump.
Connect tube assembly (27) to the transmission oil pump.
Illustration 6 g00506668
Place governor control cable (25) in position in the bracket that is located at the rear of the engine. Tighten the mounting nuts that hold the cable in position.
Connect governor control cable (25) to the control rod at the rear of the engine.
Illustration 7 g00506666
Attach a sling and a hoist to steering and brake hydraulic pump (24). The weight of the pump is 68 kg (150 lb). Place the pump in position. Install the two washers and the bolts (23) that hold the pump in position. Remove the sling and the hoist.
Illustration 8 g00506665
Connect hose assemblies (20), (21), and (22) to steering and brake hydraulic pump (24) .
Install tube assembly (18). Tighten clamp (19). Install eight bolts (17) .
Illustration 9 g00506623
Place oil filter base (12) in position. Install the five washers and bolts (14) that hold the oil filter base in position.
Connect three hose assemblies (16) .
Connect two hose assemblies (13) .
Connect two wires (15) to the sending unit in the transmission oil filter base.
Illustration 10 g00506611
Place air cleaner housing (11) in position. Install the ten washers and bolts (10) that hold the air cleaner housing in position.
Illustration 11 g00506569
Install the primary element and the secondary element in the air cleaner housing. Install cover (9) .
Illustration 12 g00506565
Place panel assembly (8) in position. Install the eight washers and bolts (7) that hold the panel in position.
Illustration 13 g00506542
Place support (6) in position. Install the three washers and bolts (5) that hold the support in position.
Illustration 14 g00506538
Install nipple (3) and change indicator (4) for the air filter.
Place flexible hose assembly (1) in position in the panel. Install clamp (2) .
Connect the hose assembly that was used to drain the oil from the torque converter.
Fill the torque converter and the transmission with oil. Refer to Operations and Maintenance Manual, "Transmission Oil" for the machine that is being serviced.End By: Install the hood. Refer to Disassembly and Assembly, "Hood Group" for the machine that is being serviced.