3500806 HOSE AS Caterpillar parts
324D, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
Rating:
Alternative (cross code) number:
CA3500806
350-0806
3500806
CA3500806
350-0806
3500806
Weight: 17 pounds 7 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3500806:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7611 Tube 2
8S-7615 Pin 2
283-1495 Stand Assembly 2
B 183-4797 Track Roller Lifting Fork 1
Start the engine. Park the machine on a hard, level surface. Stop the engine.
Release the tension on the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Illustration 1 g01211423Note: Adjust the height of Tooling (A) in order to have sufficient clearance for the removal of the track rollers when Tooling (A) is installed under undercarriage frame (1).
Lift the side of the machine. Install Tooling (A) under the undercarriage, as shown.
Refer to Step 5 and Step 6 if the machine is equipped with a single track guide. Refer to Step 7 and Step 8 if the machine is equipped with a full length track guide.
Illustration 2 g02105453
Illustration 3 g02105454
Loosen bolts (3) that hold track guide (2) to the undercarriage. Note: Do not remove bolts (3) at this time.
Attach Tooling (B) to a suitable lifting device. Use Tooling (B) in order to support track guide (2). The weight of track guide (2) is approximately 36 kg (80 lb). Remove bolts (3) and track guide (2).
Illustration 4 g02105455
Remove bolts (5), the washers, the pipes, and the supports.
Use two people in order to remove track guide (6). The weight of each track guide (6) is approximately 36 kg (80 lb). Remove bolts (4) and track guide (6). Repeat for the remaining track guides.
Illustration 5 g02105456
Loosen bolts (8) that secure track roller (7) to the undercarriage. Note: Do not remove bolts (8) at this time.
Use Tooling (B) in order to support and remove track roller (7). The weight of track roller (7) is approximately 40 kg (88 lb). Remove bolts (8) and track roller (7). Installation Procedure
Install track roller (7) in the reverse order of removal.
The plugs for track roller (7) should face toward the outside of the machine. Make sure that the mating surface between the undercarriage frame and track roller (7) is free of debris.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-7611 Tube 2
8S-7615 Pin 2
283-1495 Stand Assembly 2
B 183-4797 Track Roller Lifting Fork 1
Start the engine. Park the machine on a hard, level surface. Stop the engine.
Release the tension on the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Illustration 1 g01211423Note: Adjust the height of Tooling (A) in order to have sufficient clearance for the removal of the track rollers when Tooling (A) is installed under undercarriage frame (1).
Lift the side of the machine. Install Tooling (A) under the undercarriage, as shown.
Refer to Step 5 and Step 6 if the machine is equipped with a single track guide. Refer to Step 7 and Step 8 if the machine is equipped with a full length track guide.
Illustration 2 g02105453
Illustration 3 g02105454
Loosen bolts (3) that hold track guide (2) to the undercarriage. Note: Do not remove bolts (3) at this time.
Attach Tooling (B) to a suitable lifting device. Use Tooling (B) in order to support track guide (2). The weight of track guide (2) is approximately 36 kg (80 lb). Remove bolts (3) and track guide (2).
Illustration 4 g02105455
Remove bolts (5), the washers, the pipes, and the supports.
Use two people in order to remove track guide (6). The weight of each track guide (6) is approximately 36 kg (80 lb). Remove bolts (4) and track guide (6). Repeat for the remaining track guides.
Illustration 5 g02105456
Loosen bolts (8) that secure track roller (7) to the undercarriage. Note: Do not remove bolts (8) at this time.
Use Tooling (B) in order to support and remove track roller (7). The weight of track roller (7) is approximately 40 kg (88 lb). Remove bolts (8) and track roller (7). Installation Procedure
Install track roller (7) in the reverse order of removal.
The plugs for track roller (7) should face toward the outside of the machine. Make sure that the mating surface between the undercarriage frame and track roller (7) is free of debris.
Cat SIS web machinery list:
Parts hose Caterpillar catalog:
2302931
HOSE-RADIATOR
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
2302933
HOSE
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
2302940
HOSE
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
2302941
HOSE
330D, 330D FM, 330D L, 330D LN, 330D MH, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, M330D
2813515
HOSE
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
3244169
HOSE
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
2236915
HOSE AS
325C, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN
325C, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN
2391892
HOSE AS
330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L
330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L
2026758
HOSE AS
325C, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
325C, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
1940105
HOSE AS
330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN
330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN
3402958
HOSE AS
336E, 336E L, 336E LN, 390D, 390D L
336E, 336E L, 336E LN, 390D, 390D L
2125330
HOSE AS
330C, 365B, 365B II, 365B L, 365C L MH
330C, 365B, 365B II, 365B L, 365C L MH
2452425
HOSE AS
325D L, 328D LCR, 329D L, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345C L, 345D, 345D L, 349D, 349D L, 568 FM LL
325D L, 328D LCR, 329D L, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336F L, 345C, 345C L, 345D, 345D L, 349D, 349D L, 568 FM LL
3568085
HOSE AS
336E, 336E L, 336F L, 568 FM LL
336E, 336E L, 336F L, 568 FM LL
3568077
HOSE AS
336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 349E L VG, 349F L, 568 FM LL
336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 349E L VG, 349F L, 568 FM LL
2536566
HOSE AS
325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 3...
325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 3...
1276673
HOSE AS
322C, 324D, 324D L, 324D LN, 330B, 330B L, 330D FM, 330D L, 568 FM LL
322C, 324D, 324D L, 324D LN, 330B, 330B L, 330D FM, 330D L, 568 FM LL
2966251
HOSE AS
330D FM, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL
330D FM, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL
3458933
HOSE AS
568 FM LL
568 FM LL
3458932
HOSE AS
568 FM LL
568 FM LL
3258997
HOSE AS
336E L, 568 FM LL
336E L, 568 FM LL
1349511
HOSE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
1349510
HOSE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
2391872
HOSE AS
324D, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
324D, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL