HOSE AS 3515711 - Caterpillar

Repair Procedure
Personal injury or death can result from fumes, gases and ultraviolet rays from the weld arc.Welding can cause fumes, burn skin and produce ultraviolet rays.Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing area. Wear eye, ear and body protection before working.Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death.Read and understand the manufacturer's instructions and your employer's safety practices. Do not touch live electrical parts.See "American National Standard Z49.1, Safety in Welding and Cutting" published by the American Welding Society.American Welding Society
2501 N.W. 7th Street
Miami, Florida 33125
See "OSHA Safety and Health Standards, 29 CFR 1910", available from U.S. Department of Labor.U.S. Department of Labor
Washington, D.C. 20210
Table 1
Necessary Parts    
Item     Qty     Part Number     Description    
1     1     7T-1099     Link    
2     4     7K-1181     Cable Strap    
Table 2
Dimensions    
Item     Dimension    
A     15° 5°    
B    
20 3 mm (0.75 0.10 inch)    
C    
50 5 mm (2 0.2 inch)    The following procedure requires a new link to be added to the machine frame.
Remove the floorplate from the cab.
Illustration 1 g01108134
View of front left cab mount
Refer to Illustration 1 for the correct placement of link (1). Refer to Table 2 for the dimensions.
Weld link (1) into position.
Illustration 2 g01108137
View of front left cab mount
Use cable straps (2) to tie the large pedestal harness (3) to the new link (1) .
Use additional cable straps (2) to tie the two smaller harnesses (4) to the large pedestal harness (3) .
Install the floorplate.