HOSE AS 3529191 - Caterpillar

Illustration 6 g01327199
(36) Laser Reference Indicator (37) Laser Strike Indicator (38) Depth to Grade (39) Direction to Grade (40) Bucket ID (41) Profile Line (42) Profile Indentifier (43) Tilt Bucket (44) Reach (45) Actual Elevation (46) Dynamic Bucket Position
Illustration 7 g01327210
Level Mode
Level Mode provides a display of angle information for the excavator cab. When the bubble is in the center of the cross-hars the machine is level.When the system is in Level Mode, a screen that is similar to Illustration 8 is displayed.
Illustration 8 g01327223
Level Mode (47) Machine Roll (48) Bubble (49) Machine PitchGuidance Icons
Several different icons are used on the run screens in order to indicate elevation, reach, and slope information.General Guidance Icons
Direction to grade indicator - Down
Direction to grade indicator - On grade
Direction to grade indicator - Up
Depth - Height above/below bench depth
Target Depth - Entered value for depth of cut
Reach - Radial distance from reach at bench
Slope Indicator - (positive or zero)
Slope Indicator - (negative) Laser Icons
The following icons are only available when a LC300 laser catcher has been detected.
Laser Strike - The laser catcher has registered a useable laser strike.
Laser Ready - The laser catcher is available, but no laser reference is stored.
Laser Reference - A laser reference is stored in the system.
Depth from Laser - A laser reference is stored in the system, and target depth is calculated from the laser (not a benchmark). Tilt Bucket Icons
The following icons are used when the optional tilt bucket sensor is detected.
Tilt Bucket Slope - (positive)
Tilt Bucket Slope - (negative)
Tilt Bucket Slope - (zero)