HOSE AS 3534537 - Caterpillar

Removal Procedure
Table 1
Required Tool    
Tool     Part Number     Part Description     Qty    
A     -     Forcing Screw (1/2 by 13 NC by 3 inch)     3    Start By:
Remove the bulldozer. Refer to Disassembly and Assembly, "Bulldozer - Remove".
Illustration 1 g01095147
Install a suitable lifting device to trunnion (1). The weight of trunnion (1) is approximately 38 kg (84 lb). Remove bolts (2).
Illustration 2 g01095149
Install Tooling (A). Tighten Tooling (A) evenly in order to loosen trunnion (1). Remove trunnion (1) .
Illustration 3 g01095150
Remove bolts (4), retainer (3), and bearing (5) from trunnion (1) .Installation Procedure
Illustration 4 g01095150
Raise the temperature of bearing (5). Install bearing (5) on trunnion (1) .
Install retainer (3) onto trunnion (1). Install bolts (4). Tighten bolts (4) to a torque of 270 40 N m (199 30 lb ft).
Illustration 5 g01095147
Use a suitable lifting device to position trunnion (1) on the machine. The weight of trunnion (1) is approximately 38 kg (84 lb).
Install bolts (2). Tighten bolts (2) to a torque of 1050 150 N m (774 111 lb ft).End By: Install the bulldozer. Refer to Disassembly and Assembly, "Bulldozer - Install".