HOSE AS 3535205 - Caterpillar

Installation of Ripper Lighting
Necessary Parts
Table 8
Ripper Lighting    
Item    Part Number    Description    Qy    
83     9X-6772     Strap     2    
84     125-2000     Harness Assembly     1    
85     125-2001     Lighting Group     1    
86     133-7114     Bracket Assembly     1    
87     4P-7581     Clip     1    
88     5P-1075     Washer     3    
89     7X-0293     Bolt (3/8 inch by 4 3/4 inch)     3    Installation
Assemble the small bracket to the lamp with one bolt, two washers and one nut. Tighten the bolt to a torque of 13 3 N m (9.5 2 lb ft).
Connect harness assembly (84) to the lamp assembly. Use straps (83) as straps are required.
Install bracket (86) to the transmission cover with three bolts (89) and three washers (88) .
Illustration 17 g01423213
Assemble the guard to bracket (86) with four mounts, eight nuts and eight washers. Tighten to a torque of 20 4 N m (14.8 3 lb ft).
Install the lamp to the guard assembly with a washer and the bolt. Use one bolt and one washer through the top of the guard assembly. Tighten the bolt to a torque of 47 9 N m (35 7 lb ft).
Connect harness assembly (84) to the existing harness on the tractor.Standard Torque for Fasteners
Table 9
Nuts and Bolts    
Thread Size    Standard Torque (1)    
Metric    Inch    
M6        
12 3 N m (9 2 lb ft)    
    1/4    
12 3 N m (9 2 lb ft)    
    5/16    
25 6 N m (18 4 lb ft)    
M8        
28 7 N m (21 5 lb ft)    
    3/8    
47 9 N m (35 7 lb ft)    
M10        
55 10 N m (41 7 lb ft)    
    7/16    
70 15 N m (50 11 lb ft)    
M12        
100 20 N m (75 15 lb ft)    
    1/2    
105 20 N m (75 15 lb ft)    
M14        
160 30 N m (120 22 lb ft)    
    9/16    
160 30 N m (120 22 lb ft)    
    5/8    
215 40 N m (160 30 lb ft)    
M16        
240 40 N m (175 30 lb ft)    
    3/4    
370 50 N m (275 37 lb ft)    
M20        
460 60 N m (340 44 lb ft)    
    7/8    
620 80 N m (460 60 lb ft)    
M24        
800 100 N m (590 75 lb ft)    
    1