HOSE AS 3557561 - Caterpillar

When Required
Engine Air Intake System - Service filters Ether Starting Aid (If Equipped) - Replace cylinder Fuses and Circuit Breakers - Replace/reset Windshield Wipers and Washer - Inspect Bucket Cutting Edges - Replace if damaged Bucket Tips - Replace if damaged Bucket Wear Plates - Replace Filter Inspection - Inspect used filter for debris Ride Control Accumulator - Check pressure Fuel System - Service when loss of powerEvery 10 Service Hours or Daily
Engine Crankcase Oil - Check oil level Transmission System Oil - Check oil level Hydraulic Tank Oil - Check oil level Radiator - Check coolant level Walk-Around Inspection - Inspect machine Fuel Tank - Drain water and sediment Air Reservoir - Drain moisture and sediment Seat Belt - Inspect Brakes, Indicators and Gauges - Test Backup Alarm (If Equipped) - TestEvery 50 Service Hours or Weekly*
Cab Air System - Clean filters Bucket Upper Pivot Bearing - Lubricate 2 fitting Lift Arm and Cylinder Linkage - Lubricate 8 fittings Bucket Cylinder and Linkage Bearings - Lubricate 6 fittings Tires - Check inflation pressureEvery 100 Service Hours or 2 Weeks *
Rear Axle Trunnion - Lubricate 2 fittings Steering Cylinder Bearings - Lubricate 4 fittings Logging Fork Clamp (If Equipped) - Lubricate 6 fittingsEvery 250 Service Hours or Monthly *
Engine Oil and Filter - Change. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Engine Valve Lash - Adjust on new or reconditioned engines, then at normal interval thereafter Engine Crankcase Breather - Clean Cooling System - Add coolant additive Brake Oil Reservoirs - Check oil level Brakes - Test Drive Shaft Spline - Lubricate fitting Fan and Alternator Belts - Inspect/adjust Fan Bearing and Belt Adjusting Pulley - Lubricate fitting Air Conditioner (If Equipped) - Test Batteries - InspectEvery 500 Service Hours or 3 Months *
Transmission Oil Filter - Change filter Hydraulic Oil System - Change filter Fuel System - Change filter/clean screen Fuel Tank Cap and Fill Screen - CleanEvery 1000 Service Hours or 6 Months *
Transmission Oil - Change Drive Shaft - Lubricate 6 fittings Frame Pivot Bearings - Lubricate 2 fittings Rollover Protective Structure (ROPS) - InspectEvery 2000 Service Hours or 1 Year *
Hydraulic Tank Oil - Change oil Differentials - Change oil Final Drives - Change oil Bucket Lower Pivot Pins - Lubricate 2 places Hydraulic Tank Vacuum Breaker - Clean Engine Valve Lash and Fuel Injector Timing - Adjust Engine Valve Rotators - CheckEvery 3000 Service Hours or 2 Years *
Cooling System Coolant - Change*First Perform Previous Service Hours Items