HOSE & TUBE AS 3581490 - Caterpillar

Illustration 15 g01093002
Remove spring pins (23) from stator support (21).
Remove seal ring (25) from seal carrier (24).
Remove seal carrier (24) from stator support (21).
Illustration 16 g01093003
Attach Tooling (B) and a suitable lifting device to stator carrier (26).
Remove bolts (27) and stator carrier (26) from rotating housing (28). The weight of stator carrier (26) is approximately 61 kg (135 lb).
Illustration 17 g01093727
Remove bolts (33) from wear sleeve (30). Remove impeller (31).
Illustration 18 g01093010
Remove cap (34) from impeller (31).
Illustration 19 g01123056
Place the carrier assembly into a press. Remove retaining ring (35).
Use Tooling (F) to separate stator carrier (26) from stator (36).
Illustration 20 g01123106
Install Tooling (J) onto carrier (26). Install Tooling (J) and carrier (26) into a press.
Install Tooling (F) onto carrier (26). Remove bearing (29) from carrier (26). Remove retaining ring (35) after bearing (29) has been removed.
Illustration 21 g01093359
Remove bolts (37) to remove cover (38) from rotating housing (28).
Illustration 22 g01093362
Remove retaining ring (39) from bearing (40).
Illustration 23 g01093363
Illustration 24 g01093366
Attach Tooling (D) and a suitable lifting device to rotating housing (28).
Remove rotating housing (28) from turbine (41). The weight of the rotating housing is approximately 57 kg (125 lb).
Illustration 25 g03833771
Remove set screw (42) from locknut (43).
Use Tooling (H) to remove locknut (43) from retainer (44).
Illustration 26 g01093368
Remove lockwasher (45) from retainer (44).
Illustration 27 g01093371
Remove retainer (44) from turbine (41).
Illustration 28 g01093394
Remove bearing (40) from retainer (44).
Illustration 29 g01093395
Remove bolts (46).
Remove turbine (41) from hub (47).