3618985 HOSE AS Caterpillar parts
336E, 336E HVG, 336E L, 336E LN, 336F L
Rating:
Alternative (cross code) number:
CA3618985
361-8985
3618985
CA3618985
361-8985
3618985
Weight: 12 pounds 5 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3618985:
Number on catalog scheme:
11
For full view, you need register
Information:
Illustration 4 g03807162
Set up Conditions for Transmission Fill Calibration
If the set-up conditions are met, the display will inform the technician to click the "NEXT" button.Note: During the calibration of the transmission clutch fill, many transmission clutch fills are occurring. Remain seated. There will be some vibration and noise as the clutches are being calibrated. If any of the conditions for calibration are violated during the calibration, the calibration will be stopped. Do not operate the air conditioning or hydraulics during the calibration of the solenoids. During the automatic calibration function, avoid performing steering movements.Note: At any time during the calibration, the user can abort the calibration by pressing the "Cancel" button. Depressing the service brake pedal will also abort the calibration.Note: The engine must achieve the requested speed in a maximum of 5 seconds. If the engine does not reach the requested rpm in the given amount of time, the ECM will abort calibration due to incorrect engine speed.
The display will continuously display Calibrating Clutch #1. The ECM will fill clutch 1 and the ECM will drain clutch #1 several times. The ECM will formulate the optimal hold current and the optimal ramp levels for the solenoid that operates the modulating valve for clutch #1. When the ECM has completed calibrating this clutch, Cat® ET automatically moves to the next clutch.Note: The procedure will continue for all clutches during the calibration process.
Once the calibration has been completed successfully, the ECM will write the calibration data to memory.
Operate the machinery to check the quality of transmission shifts.
Resume normal operation of the machine.Cat® ET Error Codes
Illustration 5 g03807140
Example of Cat® ET Calibration Error Codes
During transmission fill calibration, Cat® ET error codes can appear if a problem occurs. These error codes will be displayed as pop-up dialog boxes over the calibration instruction in Cat® ET.
Table 1
Cat® ET Error Codes for the Transmission Calibrations
Error Code Description Possible Causes / Recommended Actions
0001 ECM fault Problem with ECM. Check that the correct flash file is loaded into the ECM.
After the problem is resolved, retry the calibration.
0002 Active diagnostic present Troubleshoot and repair any clutch solenoid active code.
After the problem is resolved, retry the calibration.
0006 Calibration aborted by tool Technician stopped calibration or loss connection to Cat® ET .
Ensure that a current version of Cat® ET is used.
After the problem is resolved, retry the calibration.
0009 Calibration aborted by ECM Check for another active error code that indicates the cause of the problem and resolve the problem. A communication problem between the Transmission and Engine ECMs or between Cat® ET and the Transmission ECM can also cause this error.
Retry the calibration and ensure that calibration instructions are followed.
0009 can also occur when the ECM detects that the difference in speed between the engine and TCOS (or TIS) does not meet certain stability criteria. This can be caused by unstable engine speeds during the calibration process or other intermittent loads being applied to engine during the calibration process (brake accumulators charging etc).
This error can also occur when the maximum
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3,...
307C, 308D, 311F LRR, 312D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318C, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 3...
307C, 308D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 315C, 315D L, 316E L, 318C, 318E L, 319D, 319D L, 320B, 320C, 32...
307C, 308C, 311D LRR, 311F LRR, 312C, 312C L, 314D CR, 314D LCR, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D FM, 320D LRR, 320D RR, 32...
307C, 307D, 307E, 311C, 311D LRR, 311F LRR, 312D, 312D L, 314C, 314D LCR, 314E LCR, 320B, 320C, 320C FM, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322B, 322B LN...
311D LRR, 311F LRR, 312C L, 315C, 318C, 320B, 320C, 320C L, 320D, 320D L, 320E LRR, 321C, 321D LCR, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 32...
308C, 311C, 311F LRR, 312C, 312C L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D FM RR,...
308C, 312C, 312C L, 312D, 312D L, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320D, 320D FM, 320D GC, 320D L, 320D LRR, 320D RR, 320D2...
315C, 318C, 319C, 320 L, 320B, 320C, 320E LN, 322, 322 FM L, 322 LN, 323E L, 325, 325 L, 325B, 325B L, 329E, 330, 330B, 330B L, 330C, 330C L, 336E, 345B L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L,...
308C, 311C, 311D LRR, 311F LRR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 318C, 319C, 320C, 320D, 320E L, 320E LN, 321C, 321D LCR, 322C, 322C FM, 323E L, 325 L, 325B, 325C, 325C FM, 325D L, 33...
324D, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E L, 340D L, 340D2 L
3618983
HOSE AS
336E, 336E HVG, 336E L, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LN, 336F L
3618981
HOSE AS
336E, 336E HVG, 336E L, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LN, 336F L
3853039
HOSE AS
336E, 336E HVG, 336E L, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LN, 336F L
3710128
HOSE AS
336E, 336E HVG, 336E L, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LN, 336F L
3660929
HOSE AS
336E, 336E HVG, 336E L, 336E LH, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LH, 336E LN, 336F L
3660926
HOSE AS
336E, 336E HVG, 336E L, 336E LH, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LH, 336E LN, 336F L
3515453
HOSE AS
336E
336E
3515452
HOSE AS
336E
336E
3515451
HOSE AS
336E
336E
3515450
HOSE AS
336E
336E
3515406
HOSE AS
336E
336E
3660831
HOSE AS
336E, 336E HVG, 336E L, 336E LN, 336F L
336E, 336E HVG, 336E L, 336E LN, 336F L