3632291 HOSE AS Caterpillar parts
312D2, 385B, 385C, 385C L, 390F L
Rating:
Alternative (cross code) number:
CA3632291
363-2291
3632291
CA3632291
363-2291
3632291
EXCAVATOR,
Information:
Testing a Three-Diode Rectifier Block
Illustration 1 g01933975
Illustration 2 g00613971
Three-Diode Rectifier Block (two pieces)
The following procedure tests all three diodes within a block. Check the positive rectifier block and the negative rectifier block. If any meter reading does not fall within the given ranges, replace the rectifier block.
Set the digital multimeter on the diode range. Remove all leads from the rectifier block.
To test the negative rectifier block, follow these steps:
Place the red test lead on the negative "-" terminal. Place the black test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). All readings on the meter should be between 0.4 and 1.0.
Place the black test lead on the negative "-" terminal. Place the red test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). In all cases, the meter should read "OL" (overload).
To test the positive rectifier block, follow these steps:
Place the red test lead on the positive "+" rectifier terminal. Place the black test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). In all cases, the meter should read "OL" (overload).
Place the black test lead on the positive "+" rectifier terminal. Place the red test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). All readings on the meter should be between 0.4 and 1.0. Note: A shorted diode can cause damage to the exciter rotor. If a diode is shorted, check the exciter rotor. Refer to the Testing and Adjusting, "Winding - Test" and Testing and Adjusting, "Insulation - Test". Perform these tests.Note: This rectifier block also contains varistor "CR7". "CR7" can be checked by measuring the resistance between the positive "+" rectifier terminal and the negative "-" rectifier terminal. The resistance should be a minimum of 15000.
Illustration 1 g01933975
Illustration 2 g00613971
Three-Diode Rectifier Block (two pieces)
The following procedure tests all three diodes within a block. Check the positive rectifier block and the negative rectifier block. If any meter reading does not fall within the given ranges, replace the rectifier block.
Set the digital multimeter on the diode range. Remove all leads from the rectifier block.
To test the negative rectifier block, follow these steps:
Place the red test lead on the negative "-" terminal. Place the black test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). All readings on the meter should be between 0.4 and 1.0.
Place the black test lead on the negative "-" terminal. Place the red test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). In all cases, the meter should read "OL" (overload).
To test the positive rectifier block, follow these steps:
Place the red test lead on the positive "+" rectifier terminal. Place the black test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). In all cases, the meter should read "OL" (overload).
Place the black test lead on the positive "+" rectifier terminal. Place the red test lead on the following rectifier terminals: "AC1" (3), "AC2" (4) and "AC3" (5). All readings on the meter should be between 0.4 and 1.0. Note: A shorted diode can cause damage to the exciter rotor. If a diode is shorted, check the exciter rotor. Refer to the Testing and Adjusting, "Winding - Test" and Testing and Adjusting, "Insulation - Test". Perform these tests.Note: This rectifier block also contains varistor "CR7". "CR7" can be checked by measuring the resistance between the positive "+" rectifier terminal and the negative "-" rectifier terminal. The resistance should be a minimum of 15000.
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
1136402
HOSE
314C, 315, 315C, 317, 318C, 385B, 928G, 928HZ, IT28G
314C, 315, 315C, 317, 318C, 385B, 928G, 928HZ, IT28G
1087203
HOSE AS
307C, 308D, 312C, 312C L, 314C, 316E L, 318C, 318E L, 319C, 320B, 320C, 320C L, 320D FM, 320D L, 320D LN, 321C, 321D LCR, 322B, 322B L, 322C, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D ...
307C, 308D, 312C, 312C L, 314C, 316E L, 318C, 318E L, 319C, 320B, 320C, 320C L, 320D FM, 320D L, 320D LN, 321C, 321D LCR, 322B, 322B L, 322C, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D ...
4I3991
HOSE AS
307C, 311F LRR, 312C, 312C L, 312D, 312E, 312E L, 314D CR, 314D LCR, 315D L, 318C, 319C, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM RR, 320D2 L, 321C, 322B, 322B L, 322B LN, 322C, 322C FM, 325,...
307C, 311F LRR, 312C, 312C L, 312D, 312E, 312E L, 314D CR, 314D LCR, 315D L, 318C, 319C, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM RR, 320D2 L, 321C, 322B, 322B L, 322B LN, 322C, 322C FM, 325,...
4I0769
HOSE AS
307C, 312C, 312C L, 315C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 322 LN, 322B, 322B L, 322B LN, 322C, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 345B II, 345B L, 385B, 385C, 385C...
307C, 312C, 312C L, 315C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 322 LN, 322B, 322B L, 322B LN, 322C, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 345B II, 345B L, 385B, 385C, 385C...
4I3988
HOSE AS
308C, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 315D L, 318D L, 318D2 L, 319D, 319D L, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D...
308C, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 315D L, 318D L, 318D2 L, 319D, 319D L, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D...
1048774
HOSE AS
311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320B, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 321C, 321D LCR, 322, 322 FM L, 322 LN, 322B...
311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320B, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 321C, 321D LCR, 322, 322 FM L, 322 LN, 322B...
1021157
HOSE AS
314C, 318C, 319C, 320B, 320B U, 320C, 321C, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, ...
314C, 318C, 319C, 320B, 320B U, 320C, 321C, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, ...
5I3088
HOSE AS
324D, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 365B II, 385B
324D, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 365B II, 385B
2352470
HOSE AS
365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L
365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L
3987978
HOSE
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3987977
HOSE
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3987976
HOSE
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3987975
HOSE
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3872643
HOSE
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3872641
HOSE
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3835694
HOSE AS-REFRIGERANT
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
1373055
HOSE AS
312D2, 385B, 385C, 385C L, 390D, 390D L, 390F L
312D2, 385B, 385C, 385C L, 390D, 390D L, 390F L
1584007
HOSE AS
312D2, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
312D2, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
1762306
HOSE AS
312D2, 385B, 385C, 385C L, 390D, 390D L, 390F L
312D2, 385B, 385C, 385C L, 390D, 390D L, 390F L
3921965
HOSE AS
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP
3632292
HOSE AS
312D2, 385B, 385C, 385C L, 390F L
312D2, 385B, 385C, 385C L, 390F L