HOSE GP-HYDRAULIC 3636201 - Caterpillar

Status Group 3 - Digital Sensors
Illustration 7 g00662770
The Product Link Group 3 Status screen shown in illustration 7 shows the current status of the Product Link Digital Sensors. The following table explains the possible values and their meanings.
Table 3
Status Group 3 - Digital Sensors    
Status     Values     Value Description    
Digital Sensor Input #1, #2, #3, #4     Not Configured     Default setting signifying that there is no sensor attached at this time.    
Active When this type of sensor is configured as a normally open sensor, if the sensor is currently active, the sensor is closed to ground. If the sensor is configured as a normally closed sensor, if the sensor is active the sensor is open. In both cases, the sensor will not become active until the delay time has expired.    
Inactive When this type of sensor is configured as a normally open sensor, if the sensor is currently inactive, the sensor is not closed to ground. The sensor is open. If the sensor is configured as a normally closed sensor, if the sensor is inactive the sensor is not open. The sensor is closed. In both cases, the sensor will not become active until the delay time has expired.    
Analog Sensor Input #1     Not Available     This input has not been implemented and defaults to "Not Available / Not Configured"    
Analog Sensor Input #2     Not Available     This input has not been implemented and defaults to "Not Available / Not Configured"    
Analog Sensor Input #3     Not Available     This input has not been implemented and defaults to "Not Available / Not Configured"    Status Group 4 - Product Watch
Illustration 8 g00663432
The Product Link Group 4 Status screen shown in illustration 8 shows the current status of Product Watch. Product Watch allows tracking of a machines movement. Product Watch can report if a machine moves into a specified area, or a report can be sent if a machine moves out of a specified area. Also, if a machine is operated outside of a specified time period a report will be sent. Product Watch is configured via the "Caterpillar Product Link System PC Software". Refer to the software manual for details.
Table 4
Status Group 4 - Product Watch    
Status     Values     Value Description    
Time Based Activation Status     Active     Time Based Product Watch has been properly configured and is currently activated.    
Not Active There is currently no Time Based Product Watch properly configured and/or