HOSE 3650283 - Caterpillar

Illustration 1 g00817426
(1) Auto/manual button (2) Set/menu button (3) Grade adjustment knob (4) LCD display
Once the desired selection is entered, press auto button (1) . The current operating value for that setting is displayed.
The values for the settings may be changed by turning grade adjustment knob (3) until the desired value is displayed. Some of the settings are in the ON position. Some of the settings are in the OFF position. Some of the settings may involve numerical value ranges.
Once the setting is entered, press auto/manual button (1) . The setting will be saved.
LCD display (4) displays the selection on the menu that was previously accessed. Rotate grade adjustment knob (3) to a new selection or press set/menu button (2) in order to exit the menu.Menu Selections
Performance Menu Table
Note: The factory settings in this table are considered to be the best settings for the machine. Changing the settings will not improve the performance of the machine. If you change the settings, the problem will not necessarily be solved. The problem may be related to the hydraulic system or another area of the machine.
The "Technicians Menu" is only intended for qualified Field Service Technicians and Dealers. Any changes that are made to the default "Factory Preset" settings without a thorough understanding of the effects on the Topcon® System may cause adverse consequences to the accuracy and operation of the Topcon® System.
Table 1
    Symbol     Factory Setting     Range    
Configuration     COn     15     E, 0-31, CST    
Averaging     AVg     29     1-100    
Values Type.     uA     Pro     Sol, Pro, Ser, dAn, PLS    
Current Direction     dr     SrC     SnC, SrC    
Dither Amplitude     dA     5     0-15    
Dither Frequence     dF     42     0-105    
Frequency     FrE     5Hz     1-13Hz, 244-1708 Hz    
Current Limit     CL     1.75 Amps     .67-4.8 Amps    
Hour Meter     Hr     0     Read Only    
External Auto     EA     Off     On/Off    
Auto Power Up On/Off     AP     On     On/Off    
E Squared Reset     EE     No     Yes/No    
Lock Out     LoC     On 2     Off, On 1, On 2    
Gain Elevation     Gan     75     1-100    
Gain Slope     San     75     1-100    
Valve Offsets     OFS     256     1-700    
Dead Band Elevation     db     3mm     1-30mm    
Dead Band Slope     db     .075%     .025% - .075%    
Working Window Adjustment     AdJ     20     On/Off    
Integral Function     Int     On     On/Off    
Cross Communication Network     nEt     Off     On/Off