HOSE AS 3691057 - Caterpillar

Table 1
REFILL CAPACITIES (APPROXIMATE)    
Compartment or System     Liters     US Gallons     Imperial Gallons    
Cooling System     140.0     37.0     28.6    
Cooling System Extender (ELC)     3.0     .79     .66    
Fuel Tank     910     240     200.2    
Engine Crankcase and filter     45.5     12     10    
Power Train Oil     164     43.4     36.1    
Hydraulic Oil (Tank Only)     77.2     20.4     17.0    
Final Drives (ea)     15     3.9     3.3    
Recoil Spring Compartment (ea)     45     11.7     9.9    
Pivot Shaft     30     7.8     6.6    
Equalizer Bar End Pin Joint (ea)     .11     0.03     0.02    Note: You should increase the quantity of oil in the power train whenever you operate the machine on severe slopes. The quantity of oil in the power train can be increased up to 10 percent. When you operate with this increased oil quantity, prolonged operation in some machine positions can cause high power train oil temperatures. Remove this excessive oil quantity after your work on severe slopes has been completed.Note: For severe slope operation, engine oil should be maintained on the full mark. The engine should never be overfilled with oil.Ecology Drains
Table 2
Ecology Drain Components    
Drain Location     Component Needed    
Coolant    
12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Transmission    
12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Torque Converter    
12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Engine Oil    
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread    
Hydraulic Tank     126-7914 Hose Swivel
or
12.7 mm (0.5 inch) pipe with 1-11 1/2 NPTH thread    
Bevel Gear Case     4C-8563 Hose Swivel
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread