AVSPARE.COM
parts catalog

HOSE-RADIATOR 3692272 - Caterpillar


3692272 HOSE-RADIATOR Caterpillar parts 320D GC, 320D L, 320D2, 323D L
Rating:
10
Alternative (cross code) number:
CA3692272
369-2272
3692272
Caterpillar 3692272 HOSE-RADIATOR
Weight: 0.31 pounds 0 kg.

Buy HOSE-RADIATOR 3692272 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3692272:

EXCAVATOR  320D GC   320D L   320D2   323D L   Caterpillar
Number on catalog scheme: 18
  For full view, you need register

Information:


Upper Hitch
(1) Pin. (2) Bolt and washer. (3) Upper Cap. (4) Shim. (5) Seal. (6) Bolt. (7) Shim. (8) Cup. (9) Cone. (10) Lower Cap. (11) Spacer. (12) Seal. (13) Plate. (14) Bolt and washer.1. Lubricate seal lips with lubricant being sealed. Position seals (5) and (12) and press seals into caps (3) and (10).2. Coat all bores with 4C-5592 Anti-Seize Compound.3. Cool bearing cups (8) to -75 5°C (-103 41°F).4. Install three bolts (6), equally spaced around lower cap (10).5. Install cooled lower cup (8) into housing bore. Drive cup down to ensure contact with lower cap.6. Lubricate cones (9) with oil and install.7. Install cooled top cup and drive down to ensure light contact pressure on cones.8. Install 2 mm (.080 in) of shim pack (7), upper cap (3), three bolts with washers (6) 120 degrees apart, and tighten bolts an equal amount.9. Install torquing bolt assembly and tighten.10. Apply torque wrench to torquing bolt and read torque necessary to rotate cones.11. If torque is within a range of 0.5 to 2.5 N m (4.4 to 22.1 lb ft), install remaining bolts and tighten.12. If torque is LESS THAN 0.5 N m (4.4 in lb) or GREATER THAN 2.5 N m (22.1 in lb), remove or add shims to provide correct rotating torque.13. Install remaining upper cap bolts and washers.Upper Hitch Pin Installation Procedure
1. Install spacer (11) in lower cap.2. Install pin (1) through aligned upper hitch bores.3. Bolt retainer plate (13) with two bolts and washers (14). Tighten bolts.4. Measure gap 360° around between pin cap plate and upper boss surface.5. Install two sets of shim halves (4) of equal thickness to fill measured gap.6. Install all six pin retainer bolts and washers (2) and tighten.Lower Hitch Assembly Instruction
(1) Bolt. (2) Washer. (3) Upper Cap. (4) Pin. (5) Shim. (6) Seal. (7) Bolt. (8) Cup. (9) Cone. (10) Lower Cap. (11) Seal.1. Lubricate seal lips with lubricant being sealed. Position seals (6) and (11) and press seals into caps (3) and (10).2. Coat all bores with 4C-5592 Anti-Seize Compound.3. Cool bearing cups (8) to -75 5°C (-103 41.0°F).4. Install three bolts (7), equally spaced around lower cap (10).5. Install cooled lower cup (8) and drive down to ensure contact with lower cup.6. Lubricate cones (9) with oil and install.7. Install cooled top cup and drive down to ensure light contact pressure on cones.8. Install 1.5 mm of shim pack (5), upper cap (3) and three bolts with washers (7) 120° apart and tighten bolts to 68 N m (50 lb ft).9. Install torquing bolt assembly and tighten.10. Apply torque wrench to torquing bolt and read torque necessary to rotate cones.11. Add or remove shims as required to obtain a rolling torque of 2.8 N m (22.1 in lb) to 14.2 N m (129.7 in lb).12. Install all remaining upper cap bolts with washers and tighten.Lower Hitch Pin Installation
Install pin assembly through aligned lower hitch bore and lock it in place with

Caterpillar parts catalog:

Caterpillar parts catalog
320D & 320D L Excavators KZF00001-UP (MACHINE) POWERED BY C6.6 Engine
320D GC Excavator JZA00001-UP (MACHINE) POWERED BY C6.6 Engine
323D L Excavator NZF00001-UP (MACHINE) POWERED BY C6.6 Engine


Parts hose Caterpillar catalog:

5P0767 HOSE
1090, 1190, 1190T, 120G, 1290T, 1390, 140G, 215, 215B, 215C, 215D, 225, 225D, 227, 229, 2290, 229D, 231D, 235, 235B, 235C, 235D, 236D, 2384C, 2390, 2391, 242D, 245, 245B, 245D, 246D, 2470C, 2484C, 249...
5P1420 HOSE
120M, 12M, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 235C, 236, 236B, 236B3, 236D, 2384C, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 2484C, 2491, 252B, 252B3, 256C, 257B, ...
8C3681 HOSE
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16H NA, 225D, 231D, 236D, 242D, 2...
5P0743 HOSE
120K, 120K 2, 120M, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 160M, 16M, 216, 228, 236, 236B, 236D, 242B, 242D, 246D, 247, 247B, 248, 257D, 259D, 262D, 267, 267B, 268B, 272D, 272D XHP, 277D, 279D, 287...
7Y1976 HOSE-WATER
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 30...
4I8785 HOSE AS
315B, 315B L, 315C, 315D L, 316E L, 317B LN, 318D L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 32...
4I3994 HOSE AS
307C, 311C, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320 L, 320B, 320C, 320D, 320D FM, 320D GC, 320D L, 32...
5I4396 HOSE AS
307C, 308D, 311F LRR, 312D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318C, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 3...
0875764 HOSE AS
307C, 307D, 307E, 311C, 311D LRR, 311F LRR, 312D, 312D L, 314C, 314D LCR, 314E LCR, 320B, 320C, 320C FM, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322B, 322B LN...
4I3988 HOSE AS
308C, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 315D L, 318D L, 318D2 L, 319D, 319D L, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D...
1876058 HOSE AS
320B, 320C, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
5I8510 HOSE AS
320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 325C, 330B L, 330C L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 350
3692271 HOSE-RADIATOR
320D GC, 320D L, 320D2, 323D L
3755700 HOSE-RADIATOR
320D GC, 320D L, 323D L
3692267 HOSE
320D GC, 320D L, 323D L, 323D2 L
3692259 HOSE
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L
3902273 HOSE-FUMES DISPOSAL
320D GC, 320D L, 323D L
3746007 HOSE-FUMES DISPOSAL
320D GC, 320D L, 323D L
3745991 HOSE
320D GC, 320D L, 323D L
3745990 HOSE
320D GC, 320D L, 323D L
3745989 HOSE
320D GC, 320D L, 323D L
3745988 HOSE
320D GC, 320D L, 323D L
3746012 HOSE-AIR
320D GC, 320D L, 323D L, 323D2 L
3755657 HOSE-WATER
320D GC, 320D L, 320D2, 323D L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.