HOSE AS 3704073 - Caterpillar

Illustration 1 g01056567
Lower (1) - Push the bottom of the ripper lift control lever in order to lower the ripper. Release the lever. The lever will return to the HOLD position.
Hold (2) - The ripper lever automatically returns to the HOLD position. Ripper movement stops.
Raise (3) - Push the top of the ripper lift control lever in order to raise the ripper. Release the lever. The lever will return to the HOLD position.
Illustration 2 g01056673
Shank In (4) - Pull the front of the ripper shank in/out lever toward the operator in order to move the shank in closer to the machine. Release the lever. The lever will return to HOLD position.
Hold (5) - The ripper shank in/out lever returns to the HOLD position. Ripper movement stops.
Shank Out (6) - Pull the rear of the ripper shank in/out lever toward the operator in order to move the shank out away from the machine. Release the lever. The lever will return to HOLD position.
Illustration 3 g01056679Push the ripper auto stow switch on the ripper control in order to raise the ripper to maximum height. If the machine is configured move the ripper to a full SHANK IN position. The machine can also be configured to park the ripper in the SHANK OUT position.While the ripper auto stow function is moving the ripper, press the ripper auto stow switch again in order to stop ripper movement.