HOSE AS 3718717 - Caterpillar

Illustration 30 g01373567
Attach Tooling (A) and a suitable lifting device to cover (18). The weight of cover (18) is approximately 54 kg (120 lb). Install cover (18). Install new bolts (17). Tighten bolts (17) to a torque of 460 70 N m (339 51 lb ft). Then, turn bolts (17) by an additional 120° 10°.
Illustration 31 g01373564
Install washer (16).
Illustration 32 g01373563
Illustration 33 g01373558
Install bushing (15). Install thrust washers (12) and gear (13) into planetary carrier (10). Install shaft (14). Install the retainer. Install new bolts (11). Tighten bolts (11) to a torque of 33 7 N m (24 5 lb ft). Then, turn bolts (11) by an additional 60° 5°.
Repeat Step 25 for remaining gears.
Illustration 34 g01373555
Attach Tooling (D) and a suitable lifting device to planetary carrier (10). The weight of planetary carrier (10) is approximately 254 kg (560 lb). Install planetary carrier (10).
Illustration 35 g01373554
Illustration 36 g01373969
Illustration 37 g01373550
Install thrust washer (7). Install suitable cribbing next to lower thrust washer (7) to slide gear (8) into the carrier. Install bushing (9). Install gear (8). The weight of gear (8) is approximately 63 kg (140 lb). Install remaining thrust washer (7).
Illustration 38 g01373311
Illustration 39 g01373310
Attach Tooling (F) and a suitable lifting device to shaft (6). The weight of shaft (6) is approximately 25 kg (55 lb). Install shaft (6). Use Tooling (E) to install retaining ring (5).
Repeat Steps 28 through 29 for remaining gears.
Illustration 40 g01380222
Illustration 41 g01373308
Install Tooling (D) to planetary carrier (4). The weight of planetary carrier (4) is approximately 771 kg (1700 lb). Install the O-ring seal. Install planetary carrier (4). Install new bolts (3). Use alternate sequencing to tighten seven equally spaced bolts (3) to a torque of 900 N m (664 lb ft). Tighten all bolts (3) to a torque of 900 150 N m (664 110 lb ft). Then, turn bolts (3) by an additional 120° 10°.
Illustration 42 g01373304
Attach Tooling (A), Tooling (B), and a suitable lifting device to final drive (1). The weight of final drive (1) is approximately 5280 kg (11640 lb). Position final drive (1) onto the axle.
Illustration 43 g01373306
Install bolts (2). Tighten bolts (2) in alternating order to a torque of 1400 175 N m (1033 129 lb ft). Then, turn bolts (2) by an additional 120° 5°.End By:
Install the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Install".