HOSE 3721592 - Caterpillar

Improper Connections for Jump Start Cables (14)Safety message (14) is located on the bottom side of the battery box cover on the right side of the machine.
g01409730
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Do Not Operate (15) (If Equipped)This safety message is located on the right side of the towing winch (if equipped).
g01055734
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Do Not Operate (16) (If Equipped)This safety message is located on left side of the hitch of the towed scraper (if equipped).
g01055734
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
See Operation and Maintenance Manual, SEBU8438, "TS180, TS185, TS220, and TS225 Towed Scrapers" for more information.Electrical Shock Hazard (17, 18, 19, 20, 21)
Safety message (17) is located in four places on the generator gp. Safety message (18) is located in two places on the electric drive propulsion unit. Safety message (19) is located on the power inverter near the voltage connections. Safety message (20) is located on the accessory power converter that is behind the right rear access door. Safety message (21) is located on the housing of the motor control for the water pump that is on the rear hood support.
g01404264
DANGER: Shock/Electrocution Hazard - Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Service Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Electrical Shock Hazard (22)
Safety message (21) is located on the water pump body on the right front side of the engine.
g01404270
DANGER: Shock/Electrocution Hazard - Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Service Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Locking Pin (23)This safety message is located on the left side of the machine on the cab tilt control. Install the locking pin in place when the cab is raised.
g01381179
Crush Hazard! Before tilting the cab, remove all loose articles from the cab, secure all windows, and then close the cab doors.Improper tilting of the cab can cause the cab to fall, resulting in serious injury or death. Do not tilt the cab when occupied. Refer to the Operation and Maintenance Manual for the correct cab tilting procedure.Improper securing of a