HOSE AS 3749929 - Caterpillar

Illustration 3 g00602516
Remove bolt (13) and the washer that secures angle (14) to transmission oil cooler (5) .
Remove the bolt, the washers, and the nut that secures two clips (15) to tube assembly (12). Remove two clips (15) from tube assembly (12) .
Illustration 4 g00602517
Illustration 5 g00602521
Remove the lower panel assembly on the left side of the machine.
Remove bolt (16), the washers, and the nut that secures two clips (17) to the bracket on the engine. Remove two clips (17) from tube assembly (12) .
Disconnect hose assembly (18) from elbow (19). If the removal is applicable, remove cable assembly (20) from elbow (19) .
Remove four bolts (21) that secure elbow (19) and gasket (22) to the engine. Remove elbow (19), gasket (22), and tube assembly (12) from the engine.
Remove two bolts (23), two washers (24), and two retainers (25) that secure ring retainer (26) and tube assembly (12) to elbow (19) .
Remove tube assembly (12) and the O-ring from elbow (19) .
Illustration 6 g00602522
Remove bolt (6) that secures angle (27) to transmission oil cooler (5) .
Disconnect hose assembly (28) from transmission oil cooler (5) .
If the removal is applicable, remove cable assembly (29) from the engine oil pan.
Illustration 7 g00602524
Disconnect two hose assemblies (30) and (31) from transmission oil cooler (5) .
Loosen hose clamp (32). Remove hose (33) from transmission oil cooler (5) .
Illustration 8 g00602526
Attach a suitable lifting sling around transmission oil cooler (5). Secure the suitable lifting sling to a hoist.
Illustration 9 g00602529
Remove two bolts (34), the washers, and the retainers that secure tube assembly (35) and the retaining ring to transmission oil cooler (5) .
Disconnect tube assembly (35) and the O-ring from transmission oil cooler (5) .
Remove three bolts (36) that secure transmission oil cooler (5) to bracket (37) .
Illustration 10 g00602530
Remove three bolts (38) that secure transmission oil cooler (5) to bracket (39) .
Remove transmission oil cooler (5) from bracket (39). The weight of transmission oil cooler (5) is 186 kg (410 lb).
Illustration 11 g00602531
Remove remaining eight bolts (6) that secure bonnet (40) and the gasket to transmission oil cooler (5) .
Illustration 12 g00602752
Remove eight bolts (41) that secure bonnet (42) and the gasket to transmission oil cooler (5) .
Illustration 13 g00602754
Remove bonnet (42) and gasket (43) from transmission oil cooler (5) .
Remove bonnet (40) and gasket (44) from transmission oil cooler (5) .
Illustration 14 g00602755
Remove four bolts (45) and the washer that secures inlet manifold cover (46) and the gasket to bonnet (42) .
Remove inlet manifold cover (46) and the gasket from bonnet (42) .