HOSE 3761525 - Caterpillar

Install bolts (8) that secure support assembly (11) to the rotating housing. Remove Tooling (G) from the rotating housing.
Illustration 42 g00616002
Install springs (10) to the support assembly.
Illustration 43 g00616001
Install bearing race (9) to the support assembly.
Illustration 44 g00615999
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install the remaining bolts (8) that secure bearing race (9) to the support assembly. Tighten bolts (8) to a torque of 80 10 N m (60 7 lb ft).
Illustration 45 g00580127
Attach a suitable lifting device to the rotating housing. Position the rotating housing, as shown.
Illustration 46 g00580119
Place the torque converter on suitable cribbing or a fixture, as shown. Make sure that bolts (3) or the cribbing supports the bottom of the housing.
Illustration 47 g01023139
Illustration 48 g00580674
Attach Tooling (C) and a suitable lifting device to the rotating housing. Position the rotating housing to the housing assembly. The weight of the rotating housing is approximately 70 kg (154 lb). Remove Tooling (H) and the suitable lifting device from the rotating housing.
Illustration 49 g00616949
Remove Tooling (F) from the housing.
Illustration 50 g00580123
Install spring washer (7) and retainer plate (6) to the housing. Install bolts (5). Tighten bolts (5) to a torque of 240 25 N m (177 18 lb ft).
Illustration 51 g01023137
Illustration 52 g00616953
Position pilot assembly (4) to the housing. Install bolts (2) that secure pilot assembly (4) to the housing.
Attach Tooling (C) and a suitable lifting device to the housing. Position the torque converter, as shown. Remove Tooling (C) and the suitable lifting device from the torque converter.
Illustration 53 g00580115
Install the remaining two bolts (2) and the washers that secure the pilot assembly to the housing. Tighten bolts (2) to a torque of 120 15 N m (89 11 lb ft).
Illustration 54 g00580114
Install bolts (1) and the washers that secure the housing assembly and the housing together. Tighten bolts (1) to a torque of 120 15 N m (89 11 lb ft).End By: Install the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Install".