HOSE AS 3881565 - Caterpillar

Removal Procedure
Start By:
Remove the damper. Refer to Disassembly and Assembly, "Damper - Remove".
Illustration 1 g00605649
Attach a suitable lifting device to the engine, as shown. Attach a suitable hoist to the lifting device.
Illustration 2 g00605651
Remove 20 bolts (1) and the washers that secure engine support (2) to the engine. Remove four bolts (3) and the washers that secure engine support (2) to the frame.
Illustration 3 g00605652
Carefully raise the engine off the frame. Attach a suitable lifting sling around engine support (2). Attach a suitable hoist to the lifting sling. Remove engine support (2) from the engine. The weight of the engine support is 122 kg (270 lb).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Verify that all of the components of the engine support are clean and free of foreign material prior to installation.Note: Inspect all components for wear and replace the components, if necessary.
Illustration 4 g00605652
Attach a suitable lifting sling around engine support (2). Attach a suitable hoist to the lifting sling. Position engine support (2) to the engine. The weight of the engine support is 122 kg (270 lb). Remove the tooling from the engine support.
Illustration 5 g00605651
Install 20 bolts (1) and the washers that secure engine support (2) to the engine.
Carefully lower the engine until engine support (2) rests on the frame. Install four bolts (3) and the washers that secure engine support (2) to the frame. Remove the tooling from the engine.End By: Install the damper. Refer to Disassembly and Assembly, "Damper - Install".