HOSE AS 3903533 - Caterpillar

Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-12000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job
PARTS DISPOSITION
****Parts Stock****
Send the parts back to the Service Claims Room Attn. Fred Dock.
For NACD
Contact: -->
Caterpillar Inc.
Attn: Supplier Recovery
Service Claims Room
8201 N. University
Peoria, IL 61615
****Affected Product****
Send the parts back to the Service Claims Room Attn. Fred Dock.
For NACD
Contact: -->
Caterpillar Inc.
Attn: Supplier Recovery
Service Claims Room
8201 N. University
Peoria, IL 61615
Rework Procedure
Nine remanufactured engines may be missing an 8T-2153 Socket Setscrew. A missing setscrew will cause the 7N-3007 Shaft As to fail. The affected Remanufactured Engine Serial Numbers are 5XS00741-00747 BTB00077-00078
Image1.1.1
1. Disassemble the housing for the gear assembly.
Image1.2.1
Typical example
(2) 9Y-8386 Gasket or 129-9535 Gasket
(3) 8N-2757 Adapter As or 129-9476 Adapter As
(4) 8M-5253 O-Ring Seal
(5) 0L-1026 Cup Plug
(6) 3F-5792 O-Ring Seal
(7) 7N-8525 Thrust Washer
(8) 7N-3011 Sleeve Bearing
(9) 7N-3007 Shaft As
(10) 8T-2153 Socket Setscrew
Image1.3.1
(9) 7N-3007 Shaft As
(10) 8T-2153 Socket Setscrew
(11) Threaded hole for set screw
2. Inspect shafts (9).
If setscrew (10) is installed in hole (11) on all of the
shafts, reassemble the engine. Replace gasket
(2), O-Ring (4), and O-Ring (6).
If a setscrew is not installed in one of the shafts,
replace the parts that are listed in the parts needed section.