3C8619 HOSE Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8619
3C-8619
3C8619
CA3C8619
3C-8619
3C8619
Weight: 14 pounds 6 kg.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01199991
Attach a suitable lifting device to turbocharger (5). The weight of turbocharger (5) is approximately 35 kg (77 lb). Apply Tooling (A) to the threads of bolts (11) and the bearing surfaces. Install gasket (9). Position turbocharger (5) on the engine. Install bolts (11) and nuts (10). Use the following procedure in order to tighten nuts (10) :
Tighten all of the nuts on the joint to a snug fit.
Tighten one nut to a torque of 54 5 N m (40 4 lb ft).
Tighten the diagonally opposed nut to a torque of 54 5 N m (40 4 lb ft).
Tighten the remaining nuts to a torque of 54 5 N m (40 4 lb ft).
Repeat Steps 1.b to 1.d.
Illustration 2 g01199989
Apply Tooling (A) to the threads of bolts (6) and the bearing surfaces. Position bellows assembly (7) on exhaust elbow (8) and turbocharger (5) .
Install bolts (6) and tighten the bolts to a torque of 54 5 N m (40 4 lb ft).
Illustration 3 g01199987
Install tube assemblies (3). Connect tube assemblies (4) .
Illustration 4 g01199984
Connect hose assemblies (2) and (1) .
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Coolong System Coolant - Change".End By: Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01199991
Attach a suitable lifting device to turbocharger (5). The weight of turbocharger (5) is approximately 35 kg (77 lb). Apply Tooling (A) to the threads of bolts (11) and the bearing surfaces. Install gasket (9). Position turbocharger (5) on the engine. Install bolts (11) and nuts (10). Use the following procedure in order to tighten nuts (10) :
Tighten all of the nuts on the joint to a snug fit.
Tighten one nut to a torque of 54 5 N m (40 4 lb ft).
Tighten the diagonally opposed nut to a torque of 54 5 N m (40 4 lb ft).
Tighten the remaining nuts to a torque of 54 5 N m (40 4 lb ft).
Repeat Steps 1.b to 1.d.
Illustration 2 g01199989
Apply Tooling (A) to the threads of bolts (6) and the bearing surfaces. Position bellows assembly (7) on exhaust elbow (8) and turbocharger (5) .
Install bolts (6) and tighten the bolts to a torque of 54 5 N m (40 4 lb ft).
Illustration 3 g01199987
Install tube assemblies (3). Connect tube assemblies (4) .
Illustration 4 g01199984
Connect hose assemblies (2) and (1) .
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Coolong System Coolant - Change".End By: Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".