HOSE ASSEM. (13.76" long overall) 3S8676 - Caterpillar

Warning Plates and Labels
There may be several specific safety signs on your engine. Their exact location and description of the hazard are reviewed in this section. Please take the time to familiarize yourself with these safety signs.Make sure that you can read all safety signs. Clean or replace these if you cannot read the words or see the pictures. When cleaning the labels use a cloth, water and soap. Do not use solvent gasoline, etc.You must replace a label if it is damaged, missing or cannot be read. If a label is on a part that is replaced, make sure a new label is installed on the replaced part. See your Caterpillar dealer for new labels.General
Attach a "DO NOT OPERATE" or similar warning tag on the start switch, or start button, before servicing the engine. These tags, Form SEHS7332, are available from your Caterpillar dealer.Perform all maintenance unless otherwise specified as follows: The engine stopped.The protective locks or controls in the applied position.Wear a hard hat, protective glasses and other protective equipment as required by job conditions.Do not wear loose clothing or jewelry that can catch on controls or other parts of the engine.Make certain all protective guards and covers are secured in place.Disconnect the batteries before servicing the electrical system.Do not allow unauthorized personnel in the operator's compartment when it is being serviced.Use the proper tools. Replace or repair broken or damaged equipment.Do not attempt repairs you do not understand.Operate the engine only in a well ventilated area.When operating the engine in a closed area, vent the exhaust to the outside.Remove all tools, electrical cords and other loose items from the engine before starting.When starting an engine after repair, make provisions for shutting off air supply, to stop the engine, in case there is an overspeed on start-up.Pressure air can cause personal injury. When using pressure air for cleaning, wear a protective face shield and protective clothing.Never put maintenance fluids into glass containers.Crushing or Cutting Prevention
Never attempt adjustments while the engine is running unless otherwise specified.Stay clear of all rotating and moving parts.Keep objects away from moving fan blades. They will throw or cut any object or tool that falls or is pushed into them.Wear protective glasses when striking a retainer pin to avoid injury to your eyes.Chips or other debris can fly off objects when struck. Make sure no one can be injured by flying debris before striking any object.Burn Prevention
At operating temperature, the engine coolant is hot and under pressure. The expansion tank and all lines to heaters or the engine contain hot water or steam. Any contact can cause severe burns.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to remove with your bare hand.Remove the cooling system filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. To prevent personal injury, avoid contact with the skin and eyes and do not drink.Allow cooling system components to cool before draining.Hot oil and components can cause