HOSE 4361910 - Caterpillar

Remove bearing cone (21).
Illustration 9 g01322641
Remove shim (22).
Illustration 10 g01321468
Install piston (32).
Illustration 11 g01321467
Install the O-ring seal and plug (31).
Illustration 12 g01321466
Illustration 13 g01321464
Illustration 14 g01321463
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Remove pins (30), washers (28), and spring (29).
Use Tooling (B) and a suitable press in order to install retaining ring (27) into barrel assembly (23).
Illustration 15 g01321461
Install bearing (26), plate (25), and pistons (24).
Illustration 16 g01321459
Install barrel assembly (23) and shim (22).
Illustration 17 g01321457
Install bearing cone (21).
Illustration 18 g01321456
Install bearing cup (19), port plate (20), and O-ring seal (18).
Illustration 19 g01321455
Install head (17) and bolts (16).
Illustration 20 g01321454
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (10), retainer (11), spring (12), spring (13), O-ring seal (15), and housing (14) into valve (2).
Install spool (4), retainer (5), spring (6), spring (7), O-ring seal (9), and housing (8) into valve (2).
Illustration 21 g01321453
Install gasket (3).
Illustration 22 g01321452
Install valve (2) and bolts (1). End By:
Install the pump. Refer to Disassembly and Assembly, "Piston Pump (Steering)(Center) - Install".