AVSPARE.COM
parts catalog

HOSE AS 4415867 - Caterpillar



4415867 HOSE AS Caterpillar parts HOSE
Rating:
11
Alternative (cross code) number:
CA4415867
441-5867
4415867
Caterpillar 4415867 HOSE AS

Buy HOSE AS 4415867 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt (1/2 inch - 20 NF by 4 inch) 2
B 138-7575 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01148312
Typical example
Remove the two setscrews and install the Tooling (A) as guides. Note: The weight of the flywheel (2) is approximately 54 kg (119 lb). Install the Tooling (B) in order to support the flywheel (2) before the remainder of the setscrews (1) are removed.
Remove the remaining setscrews (1) that secure flywheel (2) to the crankshaft.
Remove the flywheel (2) from the engine.
Illustration 2 g01148313
Check the condition of the ring gear (4). Remove the ring gear (4) if the ring gear is worn or damaged. Note: Identify the orientation of the ring gear (4) on the flywheel (2) and the position of the chamfer on the teeth for the correct positioning when the new ring gear is installed.
Place the flywheel (2) and the ring gear (4) on a suitable support. Use a hammer and a chisel in order to remove the ring gear (4) from the flywheel (2).


Parts hose Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.