HOSE 4450698 - Caterpillar

Illustration 7 g01147338
Illustration 8 g01147342
Note: Tooling (A) and Tooling (B) was used to maintain the position of torque converter housing (31) during the removal of the engine.
Install bolts (30). Remove Tooling (A) and Tooling (B) .
Illustration 9 g01147333
Connect hose assembly (26) and connect tube assembly (27) to oil cooler (28). Install bolt (29) .
Illustration 10 g01147336
Connect hoses (24) and (25). Open valves (22) and (23) .
Illustration 11 g01147345
Connect hose assemblies (20) and (21) .
Illustration 12 g01147330
Connect hose assembly (19) to bonnet (18) .
Illustration 13 g01147344
Install tube assembly (17). Connect hose assemblies (14), (15), and (16) .
Illustration 14 g01147340
Install tube (13). Connect hose (12) .
Illustration 15 g01147346
Illustration 16 g01147339
Move harness assembly (11) into position and connect harness assembly (11). Install the mounting hardware.
Illustration 17 g01147334
Connect hose assembly (10) and install the mounting hardware to the bottom of the engine.
Illustration 18 g01147327
Connect cable assemblies (8) and (9) .
Illustration 19 g01147332
Connect hose assembly (7) and install the mounting hardware.
Illustration 20 g01147331
Position pump (6) onto the engine. Install bolts (5) .
Illustration 21 g01147335
Install compressor (2) and install bolts (1). Connect harness assemblies (3) and (4) and install the mounting hardware.
Install the serpentine belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".End By: Install the hood and the engine enclosure. Refer to Disassembly and Assembly, "Hood and Engine Enclosure - Install".