HOSE AS 4452018 - Caterpillar

4452018 HOSE AS Caterpillar parts C175-16

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4452018
445-2018
4452018

Weight: 0.40 pounds 0 kg.

Buy HOSE AS 4452018 Caterpillar genuine, new aftermarket tractor parts with delivery
PETROLEUM ENGINE,

Compatible equipment models: 4452018:

PETROLEUM ENGINE C175-16 Caterpillar

Number on catalog scheme: 36

Caterpillar 4452018 Parts scheme HOSE AS

For full view, you need register

Information:

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Put identification marks on all wires for installation purposes.
Illustration 1 g00939793
Remove cover (1) .
Illustration 2 g00939790
Disconnect two electrical connectors (2) from solenoid valve (3) .
Illustration 3 g00939791
Remove four bolts (4) in order to remove solenoid valve (3) from manifold (5) .
Illustration 4 g00939792
Remove fasteners (6) in order to remove coils (7) from solenoid valve (3). Remove four O-ring seals (8) .Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 5 g00939792
Apply a thin coat of 1U-6396 O-Ring Assembly Compound to four O-ring seals (8) before installing the O-ring seals into solenoid valve (3). Install coils (7) and fasteners (6). Tighten the fasteners to a torque of 4 1 N m (35 8.8 lb in).
Illustration 6 g00939791
Position solenoid valve (3) onto manifold (5) and install four bolts (4) .
Illustration 7 g00939790
Connect two electrical connectors (2) to solenoid valve (3) .
Illustration 8 g00939793
Install cover (1) .