HOSE AS 4455667 - Caterpillar

Operation of the Work Tool with One Pedal
With certain attachment combinations, the work tool pedal can have different functions. Always check for work tool pedal function before using the work tool pedal. Improper operation of the work tool pedal could result in serious injury or death.
Illustration 1 g00368758
CLOSE (1) - Push down on the front of the pedal in order to close the work tool.
OPEN (2) - Push down on the rear of the pedal in order to open the work tool.
Illustration 2 g00365375
(3) Lock pin (A) LOCKED position (B) UNLOCKED position (STORAGE position)In order to use the work tool, remove lock pin (3) from LOCKED position (A) and place lock pin (3) in UNLOCKED position (B) .When you are not using the work tool, put lock pin (3) in LOCKED position (A). This will lock the pedal in order to help prevent any unexpected operation of the work tool.
Illustration 3 g00106787
(3) Lock pin (4) Pin (5) NotchNote: To prevent lock pin (3) from being accidentally pulled out, insert pin (4) through notch (5) and turn lock pin (3) counterclockwise by 1/4 turn.Operation of the Work Tool with Two Pedals
With certain attachment combinations, the work tool pedal can have different functions. Always check for work tool pedal function before using the work tool pedal. Improper operation of the work tool pedal could result in serious injury or death.
Illustration 4 g00362532
CLOSE (1) - Push down on the front of the right pedal in order to close the work tool.
OPEN (2) - Push down on the front of the left pedal in order to open the work tool.
Illustration 5 g00368757
Right pedal (3) Lock pin (A) LOCKED position (B) UNLOCKED position (STORAGE position)
Illustration 6 g00368760
Left pedal (3) Lock pin (A) LOCKED position (B) UNLOCKED position (STORAGE position)Note: There is a lock pin in the right pedal for the work tool and there is a lock pin in the left pedal for the work tool. When you are changing the position of one of the lock pins, you must also change the position of the other lock pin.In order to use the work tool, remove lock pin (3) from LOCKED position (A) and place lock pin (3) in UNLOCKED position (B) .When you are not using the work tool, put lock pin (3) in LOCKED position (A) on both the left pedal and the right pedal. This will lock the pedals in order to help prevent any unexpected operation of the work tool.
Illustration 7 g00106787
(3) Lock pin (4) Pin (5) NotchNote: To prevent lock pin (3) in the right pedal from being accidentally pulled out, insert pin (4) through notch (5). Turn lock pin (3) counterclockwise by 1/4 turn. To prevent lock pin (3) in the left pedal from being accidentally pulled out, insert the pin. Turn the lock pin clockwise by 1/4 turn.