HOSE & TUBE AS 4470149 - Caterpillar

TECHNICAL INFORMATION BULLETIN SEPTEMBER 15, 2004
TELEHANDLERS TH360B (SLE1-UP)
TH460B (SLF1-UP)
TH560B (SLG1-UP)
Component Code(s) 1408 3282SUBJECT: INSPECT THE 251-5994 WIRING HARNESS (REAR AXLE LOCK DISABLE) BEFORE INSTALLATION ON TELEHANDLERS
PROBLEM:
Reports have been received from the field that some of the 251-5994 Wiring Harnesses (Rear Axle Lock Disable) that are required for PS50844 have been wired incorrectly. The publication number for PS50844 is SEBE8887.
SOLUTION:
Inspect the 251-5994 Wiring Harnesses (Rear Axle Lock Disable) before you perform PS50844 and before you install the 251-5994 Wiring Harnesses (Rear Axle Lock Disable).
Inspect the 251-5994 Wiring Harnesses (Rear Axle Lock Disable) to make sure that the jumper wires are in the correct locations and the sealing plugs are in the correct locations. The jumper wires should be in position 2 and position 4. The sealing plugs should be in position 1 and position 3.
If the jumper wires or the sealing plugs are in the wrong locations, disassemble the connector. Assemble the connector in the correct locations. The jumper wires should be in position 2 and position 4. The sealing plugs should be in position 1 and position 3.
COPYRIGHT 2004 CATERPILLAR
ALL RIGHTS RESERVED