HOSE AS 4601753 - Caterpillar

Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Personal injury or death can result from worn wire rope cable.Worn or frayed cable could break causing injury.Check the wire rope cable. If cable is worn or is frayed install a new cable.
Wear leather gloves when handling the winch cable.
Unroll the wire rope cable from the spool. Never lift the wire rope off the spool in coils.
Use the correct size ferrule for the winch cable in order to attach the winch cable to the load drum. Never use a knot in order to secure the winch cable to the load drum.
The cable is attached to the drum on the winch with a cable ferrule. The ferrule is placed into a socket on the drum.Use the following table to order the cable.
Table 1
Wire Rope
Wire Rope
Diameter Recommended Ferrule Holding Capacity
25 mm (1 inch) J-8 91 m (300 ft)
29 mm (1.13 inch) J-9 84 m (276 ft)
32 mm (1.25 inch) J-10 59 m (193 ft)
Put the cable in a straight line behind the tractor.
Illustration 1 g00550538
Install the ferrule end into the socket .
Reel in the cable.