HOSE AS 4610736 - Caterpillar

Replace the Jacket Water Temperature Regulators and the Oil Cooler Water Temperature Regulators
Replace the water temperature regulators before the water temperature regulators fail. Replacing the water temperature regulator is a recommended preventive maintenance practice. Replacing the water temperature regulators reduces the chances for unscheduled downtime.A water temperature regulator that fails in a partially opened position can cause overheating or overcooling of the engine.A water temperature regulator that fails in the closed position can cause excessive overheating. Excessive overheating could result in cracking of the cylinder head or a seizure of the pistons.A water temperature regulator that fails in the open position will cause the engine operating temperature to be too low during partial load operation. Low engine operating temperatures during partial loads could cause an excessive carbon buildup inside the cylinders. This excessive carbon buildup could result in an accelerated wear of the piston rings and wear of the cylinder liner.
Failure to replace the water temperature regulators on a regularly scheduled basis could cause severe engine damage.Never operate the engine without the water temperature regulators installed.If the water temperature regulator is installed incorrectly, the engine may overheat, causing cylinder head damage. Ensure that the new water temperature regulator is installed in the original position.
Refer to the Service Manual for the procedure to replace the water temperature regulators, or consult your Cat dealer.Note: If only the water temperature regulators are replaced, drain the coolant from the cooling system to a level that is below the regulator housing.