HOSE AS 4716201 - Caterpillar

Qty
Part Number Description
7 4D7388 CLIP
1 4P7581 CLIP-LADDER
2 5M3062 BOLT
1 7K1181 STRAP-CABLE
2 8F9836 LUG
2 8T4896 WASHER-HARD
5 8T7008 BOLT
1 3080418 HARNESS AS
ACTION REQUIRED
Replace the existing 227-5005 Harness As. with a new 308-0418 Harness As. Update the harness routing and clipping as shown in the illustrations. See the attached rework procedure for details.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-7000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 5.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1) Refer to the Service Manual as required.
2) Remove old harness (227-5005) from draft frame. Save the hardware- clips, bolts, & nuts.
3) Locate 2 lugs on upper right inside edge of bowl according to Image1.1.1.
4) Lay out new harness (308-0418) along draft frame.
5) Secure harness to block at outer end of draft frame with the removed bolt, washer and a large clip (4D-7388). Clip harness at green tape( Image 1.1.2)
6) Connect harness to hitch harness on top of gooseneck and secure using removed clips and hardware. Connect harness lead to work light and secure with removed hardware.
7) Connect harness to bowl side harness.
8) Secure harness at green tape to top lug according to Image 1.1.3.
9) Secure harness to 2nd lug with clip according to Image 1.1.3.
10) Secure harness to outside of ejector hose sleeve with 5 clips (4D-7388) and 5 bolts (8T-7008). Reuse nuts & washers. Image1.1.4.
11) Re-install steel protective cover over connections at bowl side.
12) Test machine for proper operation.
Image1.1.1
Image1.1.2
Image1.1.3
Image1.1.4