HOSE-BULK 4746348 - Caterpillar

2. Remove nuts and bolts (1). Remove bolts (3), and remove block (2). 3. Fasten a sling and hoist to the drive shaft. Remove nuts and bolts (4) and (5). Remove drive shaft (6). The weight of the drive shaft is approximately 24 kg (53 lb.).4. To install the drive shaft, fasten a sling and hoist to it, and put it in position.5. Install nuts and bolts (4) and (5). Tighten the bolts to a torque of 135 14 N m (100 10 lb.ft.).6. Put block (2) in position, and install nuts and bolts (1) and bolts (3).7. Move the ejector to the rear.