HOSE-RADIATOR 4776793 - Caterpillar

Illustration 1 g03326973
Once selected, the diagnostic detail message will display in the bottom left of the screen. Record the information under "extendedTexts" section.
This information will be helpful when proceeding through this process.Expected Result:Diagnostic details collected.Results:
Diagnostic details collected. - Proceed to Test Step 6.
Diagnostic details are not available. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOPTest Step 6. RUN PLANNING CHECK OUT PROCEDURE.
Perform the Planning System Checkout in Special Instruction, REHS6109-00, "Calibration Procedure for the 793F CMD". This procedure can be found on the Command for hauling publications DCC site.Expected Result:Planning checkout is completed successfully.Results:
Planning checkout is completed successfully. - Proceed to Test Step 8.
Unable to complete the planning checkout successfully. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOPTest Step 7. TROUBLESHOOT THE PROBLEM THROUGH THE ENGINE OR POWER TRAIN SYSTEM TROUBLESHOOTING MANUALS.
Troubleshooting the engine using Troubleshooting, KENR5398, "Troubleshooting C175-16 and C175-20 Engines for 793F and 797F Off-Highway Trucks " manual. This document is available on the SISweb.
Troubleshooting the truck power train system using SOTTA, UENR2209, "793F Off-Highway Truck/Tractor Power Train Electric Control System- System Operation, Troubleshooting, Testing and Adjusting " manual. This document is available on the Command for hauling DCC site.Expected Result:Problem discovered and corrected.Results:
Problem discovered and corrected. - Proceed to Test Step 8.
Problem cannot be resolved in the braking system troubleshooting. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOPTest Step 8. RESTART SYSTEM.
Key ON the machine and verify status of event code.Expected Result: eid 9962 cleared.Results:
eid 9962 cleared. - STOP
eid 9962 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary but code remains active. - Proceed to Test Step 5.
eid 9962 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary. Diagnostic details have been recorded and planning checkout procedure has been successfully completes but code remains active. - Proceed to Test Step 7.
eid 9962 is still active after completing all above steps. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP