HOSE 4776796 - Caterpillar

Illustration 1 g03326973
Once selected, the diagnostic detail message will display in the bottom left of the screen. Record the information under "extendedTexts" section.
This information will be helpful when proceeding through this process.Expected Result:Diagnostic details collected.Results:
Diagnostic details collected. - Proceed to Test Step 8.
Diagnostic details are not available. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOPTest Step 7. CREATE A DATA CLIP FROM THE DATA LOGGER.
Create a file clip including all data for 10 minutes prior to the event code activation until 2 minutes after activation.Expected Result:Data file clip created.Results:
Data file clip created for live event. - Correct map and proceed to Test Step 8.
Data file clip created for activation during planning checkout. - Correct map and proceed to Test Step 9.Test Step 8. RUN PLANNING CHECK OUT PROCEDURE.
Perform the Planning System Checkout in Special Instruction, REHS6109-00, "Calibration Procedure for the 793F CMD". This procedure can be found on the Command for hauling publications DCC site.Expected Result:Planning checkout is completed successfully.Results:
Planning checkout is completed successfully. - Proceed to Test Step 9.
Unable to complete the planning checkout successfully. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOPTest Step 9. RESTART SYSTEM.
Key ON the machine and verify status of event code.Expected Result: eid 9965 cleared.Results:
eid 9965 cleared. - STOP
eid 9965 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary but code remains active. - Proceed to Test Step 5.
eid 9965 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary. Roads have been inspected in Cat MineStar System and physically, corrective actions taken where necessary but code remains active. - Proceed to Test Step 6.
eid 9965 is still active. Wheels, tires, and suspension have been visually inspected and corrected where necessary. Roads have been inspected in Cat MineStar System and physically, corrective actions taken where necessary but code remains active. Diagnostic details have been recorded and planning checkout procedure has been successfully completes but code remains active. - Proceed to Test Step 7.
eid 9965 is still active after completing all above steps. The cause of the problem is uncertain. Contact Caterpillar technical support with the information that has been gathered. - STOP