HOSE AS 4794848 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
C     8S-7640     Stand     1    
8S-7631 Tube     1    
FT1603 Tube Cap     1    
D     1U-9200     Lever Puller Hoist     1    
138-7574 Link Bracket     1    
E     6V-6080     Torque Multiplier Gp     1    
Illustration 1 g00837081
Install a suitable lifting device and Tooling (D) to the arm assembly (draft frame). The arm assembly (draft frame) weighs approximately 770 kg (1700 lb). Install the arm assembly to the trunnion.
Illustration 2 g00837084
Install cap (5) .
Illustration 3 g00837079
Support arm assembly (draft frame) with Tooling (C) .
Remove the lifting device and Tooling (D). Install a suitable lifting device to the arm assembly (draft frame).
Illustration 4 g00837075
Install the arm assembly. Install thirty bolts (4). The bolts must be torqued properly. Refer to Specifications, "Draft Frame" for the proper torque. As needed, use Tool (E) in order to torque the bolts.
Illustration 5 g00837073
Connect four hose assemblies (3) .
Illustration 6 g00837072
Install seven clamps (2) .
Illustration 7 g00837070
Install guards (1) .