HOSE AS 4944725 - Caterpillar

The ECM detects that one or more of the programmable parameters are not properly configured.System Response:Any unprogrammed parameters are set to the default value. If the default setting of the configuration is not changed to the appropriate sales model, a diagnostic code is generated. The diagnostic code is generated in order to warn the service personnel that the module must be configured.Test Step 1. SYSTEM CONFIGURATION
Use the CAT ET to verify that the configurable parameters for the ECM are properly configured.
Reset the configuration to the appropriate sales model for your machine. Expected Result:The control module has been reset to the appropriate sales model and the parameters are properly configured.Results:
OK - The control module has been reset to the appropriate sales model.STOP