HOSE AS 4I6130 - Caterpillar

Illustration 1 g03299337
Typical example
Illustration 2 g03299338
Right side view
Typical example
Table 1
Specification for 383-6559 Flywheel Housing Gp and 383-6560 Flywheel Housing Gp
Item Qty Part Specification Description
Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign materials.
To seal the joint between the flywheel housing and the cylinder block, apply blue Loctite High Flex GM to the front face of the flywheel housing.
1 6 1D-4574 Bolt Length of 1/2 inch diameter bolt is 152.40 mm (6.000 inch).
Torque to 135 20 N m (100 15 lb ft).
2 2 9X-8874 Bolt Length of 1/2 inch diameter bolt is 76.20 mm (3.000 inch).
Torque to 135 20 N m (100 15 lb ft).
3 8 9X-8873 Bolt Length of 1/2 inch diameter bolt is 57.15 mm (2.250 inch).
Torque to 135 20 N m (100 15 lb ft).
4 2 1D-4597 Bolt Length of 5/8 inch diameter bolt is 165.10 mm (6.500 inch).
Torque to 270 40 N m (199 30 lb ft).
5 12 1D-4593 Bolt Length of 5/8 inch diameter bolt is 139.70 mm (5.500 inch).
Torque to 270 40 N m (199 30 lb ft).
6 4 9X-8878 Bolt Length of 1/2 inch diameter bolt is 133.35 mm (5.250 inch).
Torque to 135 20 N m (100 15 lb ft).
7 2 1D-4602 Bolt Length of 5/8 inch diameter bolt is 241.30 mm (9.500 inch).
Torque to 270 40 N m (199 30 lb ft).