HOSE 4W4614 - Caterpillar

Rated Load for the Logging Fork
For North American applications, the rated operating load is defined by SAE "J1197" (February 1991) as 50 % of the full turn static tipping load.For European applications, the rated operating load is defined by CEN "474-3" as 60 % of the full turn static tipping load.
Illustration 3 g00275264
Discharge clearance (A) and reach (B) are given for each logging fork at the maximum lift height and at the maximum discharge angle. Discharge clearance is measured from the ground to the bottom edge of the logging fork. The reach is measured from the front of the front tire to the front edge of the logging fork.The following table provides the rated operating loads for the standard machine (North American configuration).Reference: Refer to Special Publication, GELQ 0149, "Wheel Loader Fork Application Guide" for the rated loads of other machine configurations.
Table 3
Rated Load ( 938G Logging Forks)    
Logging Fork    Ballast in Rear Tires    Counterweight    Rated Operating Load    Discharge Clearance
A    Reach
B    
Millyard Fork    
810 kg (1785 lb)    
554 kg (1220 lb)    
2800 kg (6170 lb)    
2491 mm (98.0 inch)    
1507 mm (59.3 inch)    
Logging Fork    
810 kg (1785 lb)    
554 kg (1220 lb)    
3150 kg (6945 lb)    
2491 mm (98.0 inch)    
1507 mm (59.3 inch)    
Table 4
Rated Load ( IT38G Logging Fork)    
Logging Fork    Ballast in Rear Tires    Counterweight    Rated Operating Load    Discharge Clearance
A    Reach
B    
125-2607 Millyard Fork    
810 kg (1785 lb)    
770 kg (1695 lb)    
3000 kg (6610 lb)    
2159 mm (85.0 inch)    
1031 mm (40.6 inch)    
119-2297 Grapple Fork    
810 kg (1785 lb)    
770 kg (1695 lb)    
2900 kg (6390 lb)    
2503 mm (98.5 inch)    
809 mm (31.8 inch)    
106-1060 Lumber Fork    
810 kg (1785 lb)    
770 kg (1695 lb)    
2550 kg (5620 lb)    
2205 mm (86.8 inch)    
751 mm (29.6 inch)    Rated Load for the Material Handling Arm
For North American applications, the rated operating load is defined by SAE "J1197" (February 1991) as 50 % of the full turn static tipping load.For European applications, the rated operating load is defined by CEN "474-3" as 60 % of the full turn static tipping load.
Illustration 4 g00104502
The placement height (ground line to the chain hook) and reach (center of the front tire to the chain hook) are given for the highest position of the material handling arm and for the lowest position of the material handling arm.The following table provides the rated operating loads for the standard machine configuration with material handling arm.
Table 5
Rated Load ( IT38G Material Handling Arm)    
Position of Material Handling Arm    Retracted
A    Mid-Position
B    Extended
C    
Rated Operating Load    
1989 kg (4376 lb)    
1643 kg (3615 lb)    
1428 kg (3142 lb)    
Placement Height at Lowest Position    
-2282 mm (-89.8 inch)    
-2930 mm