HOSE AS-GUARD 5083571 - Caterpillar

Illustration 1 g01623165
Note: After assembly, the bearings must not extend beyond either side face of the cylinder assembly. (1) 250-1563 Bearing Quantity ... 2 Inside diameter ... 75.342 0.020 mm (2.9662 0.0008 inch) Outside diameter ... 88.150 0.013 mm (3.4705 0.0005 inch) (2) Apply 1U-8846 Gasket Sealant to the bottom of the cover before assembly. (3) Apply 1U-8846 Gasket Sealant to the bottom of the connector plate before assembly.Note: Apply 154-9731 Thread Lock Compound to the threads of the retainer before assembly. (4) Torque for the retainer ... 20 4 N m (15 3 lb ft)Note: Apply 4C-9506 Retaining Compound to the threads of the piston before assembly. (5) Torque for the piston ... 600 60 N m (440 44 lb ft)Note: Lubricate the threads of the head with clean grease before assembly. (6) Torque for the head ... 600 130 N m (440 95 lb ft) (7) Lubricate the sealing lip of the buffer seal assembly lightly with the lubricant that is being sealed. (8) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. (9) Lubricate the sealing lip of the wiper seal lightly with the lubricant that is being sealed. (10) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove before assembly.Note: Apply 4C-4030 Thread Lock Compound to the threads of the setscrew before assembly. (11) Torque for the setscrew ... 25 3 N m (18 2 lb ft) (A) Bore of the cylinder assembly ... 133.35 0.08 mm (5.250 0.003 inch) (B) Diameter of the rod assembly ... 76.150 0.038 mm (2.9980 0.0015 inch) (C) Bore of the head over four lands ... 76.48 0.03 mm (3.011 0.001 inch)Note: After assembly, the sleeve bearings must not extend beyond either side face of the rod assembly. (12) 250-1561 Bearing Quantity ... 2 Inside diameter ... 65.322 0.020 mm (2.5717 0.0008 inch) Outside diameter ... 78.125 0.013 mm (3.0758 0.0005 inch)