HOSE AS 5088828 - Caterpillar

Illustration 3 g01040714
Use Tooling (A) in order to remove spanner nuts (3).
Illustration 4 g01040715
Remove bolts (4) and caps (5).
Illustration 5 g01040808
Remove the differential from differential housing (8). Remove bearing cups (6) and (7).
Illustration 6 g01040820
Use Tooling (B) in order to remove bearing cone (9).
Illustration 7 g01040822
Use Tooling (B) in order to remove bearing cone (10).
Illustration 8 g01040825
Remove bolts (11) and remove bevel gear (12).
Illustration 9 g01517379
Remove cover (13). Remove thrust washer (14) and side gear (15). Use a suitable punch and a suitable hammer in order to drive out locking pin (16). Remove planetary shaft (17).
Illustration 10 g01517383
Remove thrust washers (18) and gears (19). Remove side gear (21) and thrust washer (20).
Illustration 11 g01517429
Straighten nut (22) out of the locking tab.
Illustration 12 g01517434
Use Tooling (C) in order to hold yoke (23) and remove nut (22).
Illustration 13 g01517436
Remove washer (24) and O-ring seal (25). Remove yoke (23).
Illustration 14 g01517453
Illustration 15 g01517455
Remove lip seal (26) from differential housing (8).
Tap the end of pinion shaft (30) with a soft hammer in order to remove pinion shaft (30) from differential housing (8). Remove bearing cone (29), washers (27), and collapsible spacer (28).
Illustration 16 g01517459
Use a suitable hammer and a suitable punch in order to remove bearing cups (31) and (32).
Illustration 17 g01517473
Use Tooling (D) and a suitable press in order to remove bearing cone (33) from pinion shaft (30). Remove the shim that is positioned under bearing cone (33). Check the shim for wear. If necessary, replace the shim.