HOSE AS 5157394 - Caterpillar

Changing Parameter Settings
1. With the power switch OFF, hold NEXT and UP switches while turning the power switch ON. 2. Hold NEXT and UP until LAB MODE appears on the display and release the NEXT and UP switches.3. The version and date will be displayed.4. If the settings are not correct, go to the CAL mode and use the UP or DOWN switch to change values. 5. Push TOTAL DISTANCE switch to DISPLAY to lock in on the machine model number.6. Set the correct K factor for the flowmeter. Check or reset the speed pick up defaults.7. Reset DISTANCE SINCE LAST RESET with the down switch while in the SET mode.8. If diagnostics are displayed when pushing the DISPLAY SELECT switch to NEXT in the CAL mode, release the SET/CALIBRATE switch to stay in the LAB mode.9. Hold the SET/CALIBRATE switch to CAL then hold the DISPLAY SELECT switch to LAST and the display will show maximum travel speed.10. Hold the DISPLAY SELECT switch to NEXT to display the machine model number. Hold the UP or DOWN switch to change (index) through the machine model numbers.11. Release the SET/CALIBRATE switch and turn OFF the power switch.