HOSE AS 5208931 - Caterpillar

Parking Brake - This light indicates that the parking brake is engaged. If the machine is in neutral, only the indicator lights. However, if the machine is in a forward gear or a reverse gear, the action lamp and the action alarm also activates.
Charging System - This light indicates that the battery voltage is outside the battery charge range. While the engine is running, the light also turns on when the alternator frequency is low.
Engine Overspeed - This light indicates that the engine speed is too high.
Engine Oil Pressure - This light indicates that the engine oil pressure is low.
Transmission Oil Filter - This light indicates that the transmission oil filter is restricted.
If the transmission oil filter is plugged, the bypass valve will open. Unfiltered transmission oil will flow through the system and damage to other system components may occur.
Inlet Air Temperature - This light indicates that the air inlet temperature is high.
Fuel Pressure - This light indicates that the fuel filter is restricted.
Primary Steering - This light indicates that the primary steering pressure is low.
Steering Oil Temperature - This light indicates excessive steering oil temperature.
Brake Oil Pressure - This light indicates that the brake oil pressure is low.
Axle Oil Temperature - The light indicates that the axle oil temperature is high.
If the hydraulic oil filter is plugged, the bypass valve will open. Unfiltered hydraulic oil will flow through the system and damage to other system components may occur.
Reference: For the location of the electrical components, refer to the Electrical System Schematic in the Service Manual for your machine.Indicators
Illustration 2 g01059611
Quickshift function (6) - This light indicates when the quickshift switch is activated.
Secondary Steering Pressure (7) - This light indicates that the secondary steering system is activated.
Action Indicator (8) - This light indicates that the monitoring system has detected a fault.
Reduced Rimpull (9) - This light indicates that the rimpull selection switch has been moved to reduced rimpull.
Lockup Clutch (10) - This light indicates that the torque converter lockup control is activated.
Throttle Lock (11) - This light indicates that the throttle lock is activated.