HOSE AS 5248202 - Caterpillar

2. Remove bolts (2) and valve cover (1). The following steps are for installation of the valve covers.3. Put the gasket and valve cover (1) in position on the cylinder head.4. Install bolts (2). 5. Tighten the bolts to a torque of 14 3 N m (10 2 lb ft)in the number sequence shown.6. Connect the hose to the crankcase ventilator. Make sure the clamps are tightened to a torque of 2.3 0.6 N m (20.00 5.00 lb in). For more detailed information regarding the valve covers, see the topic "Valve Covers" in the Specifications Manual.