HOSE AS 5284211 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 6V-1820 Bolt 2
C 9S-3263 Thread Lock Compound 1
D 1G-4004 Lubricant 1
H 8T-5096 Dial Indicator Gp 1
Illustration 1 g01046497
Install bearing (13) in bearing housing (12).
Illustration 2 g01046494
Apply Tooling (C) to the threads of bolts (9). Position plate (10) on bearing housing (12) and install bolts (9).
Repeat Steps 1 and 2 to install the bearing in bearing housing (5).
Install eccentric weight (8) in bearing housing (12).
Install O-ring seal (11) on bearing housing (12).
Illustration 3 g01046491
Apply Tooling (D) between the two lip seals. Remove the spring on the external lip seal.
Install the lip seals in bearing housing (5).
Position plate (6) on bearing housing (5) and install bolts (7).
Illustration 4 g01046483
Position Tooling (A) on bearing housing (5) and install Tooling (B). Attach a suitable lifting device to Tooling (A). The weight of bearing housing (5) is approximately 25 kg (55 lb).
Use a suitable lifting device to position bearing housing (5) on the remaining bearing housing and the eccentric weight. Install bolts (4).
Illustration 5 g01011270
Position Tooling (H) on the end of the eccentric weight shaft (13) and check end play. The correct end play should be 0.65 mm to 1.6 mm (0.026 inch to 0.063 inch).
Illustration 6 g01046481
Position drive shaft (1) on the shaft of eccentric weight assembly (3) and install spring pin (2).End By:
Install the eccentric weight. Refer to Disassembly and Assembly, "Eccentric Weight - Install".